Xantrex Technology DR1524W - Manual (Page 87)

Specifications of the DR Inverter
975-0012-01-02 Rev A A–5
Temperature Comp Probe (BTS) optional
Remote Control (RC8)
d optional
a.Specifications subject to change without notice.
b.This is the minimum AC current required to obtain full pass-through and maximum battery charging.
c.Product may not meet voltage regulation specifications at other than "Input Nominal" at full-rated load.
d.Also compatible with the RC4.
Table A-2 Electrical Specifications for the DR Inverter/Chargers
a
- 220 Vac/60 Hz Models
Model DR1512W DR2412W
Table A-3 Electrical Specifications for the DR Inverter/Charger
a
- 230 Vac/50 Hz Models
Model DR1512E DR1524E DR1548E DR2424E
AC Input Voltage 230 Vac 230 Vac 230 Vac 230 Vac
AC Input Low Transfer
Voltage 80 to 210 Vac 80 to 210 Vac 80 to 210 Vac 80 to 210 Vac
AC Input Current b 55 amps 55 amps 55 amps 55 amps
Continuous Power
(@ 25°C) 1500 VA 1500 VA 1500 VA 2400 VA
Continuous Output
(@25 °C) 12.5 amps AC 20 amps AC 12.5 amps AC 20 amps AC
Efficiency 94% max 94% max 94% max 95% max
AC Output Voltage
(rms) 230 Vac 230 Vac 230 Vac 230 Vac
Surge Capability:
1 mSec Rating 20 amps AC 20 amps AC 20 amps AC 40 amps AC
DC Input Current:
Search Mode 0.045 amps 0.055 amps 0.030 amps 0.030 amps
Full Voltage 0.700 amps 0.900 amps 0.350 amps 0.450 amps
DC Current at Rated
Power 165 amps 280 amps 80 amps 140 amps
Short Circuit Current 400 amps 800 amps 280 amps 560 amps
DC Input Voltage
(nominal)
c
12.6 Vdc 25.2 Vdc 50.4 Vdc 25.2 Vdc
DC Input Voltage
Range 10.9 to 15.5 Vdc 21.8 to 31 Vdc 43.6 to 62 Vdc 21.8 to 31 Vdc