Yamaha RX-V1800 - Manual (Page 100)

96
En
Use this feature to save up to six of your favorite settings
that can be easily recalled when needed. You can save the
following system setting parameters:
* The settings of “DYNAMIC RANGE”, “LFE LEVEL”, and
the tonal quality control for headphones are not saved.
■ Saving by the MSYSTEM MEMORY
buttons
You can save the system settings stored in “MEMORY1”
to “MEMORY4” by pressing the corresponding
MSYSTEM MEMORY buttons.
Press and hold one of the M
SYSTEM MEMORY
buttons on the remote control for 4 seconds.
“MEMORY 1 SAVE Done” (example) appears in the front
panel display, and then this unit saves the current system
setting to the corresponding memory number.
System settings are already saved in the selected memory
number, this unit overwrites the old system settings.
■ Saving by the SET MENU operation
You can save the system settings stored in “MEMORY1”
to “MEMORY6” by using the “SYSTEM MEMORY”
menu in “SET MENU”.
1
Press F
SET MENU on the remote control.
The top “SET MENU” display appears in the OSD.
2
Press 3n to select “SYSTEM MEMORY” and
then press 3
ENTER.
The “SYSTEM MEMORY” menu appears in the
OSD.
3
Press 3n to select “SAVE” and then press
3
ENTER.
The following menu appears in the OSD.
Saving and recalling the system settings (SYSTEM MEMORY)
Saved parameters Page
“BASIC MENU” parameters
(except “TEST TONE”)
80
“VOLUME MENU” parameters
(except “INIT. VOL.”)
84
“SOUND MENU” parameters*
(except “EXTD SUR.”)
85
“DISPLAY SET” parameters
(except “SHORT MESSAGE”)
91
“VIDEO SET” parameters 92
Currently selected sound field program
(or the Pure Direct mode)
46
Sound field parameter settings 67
Tonal quality control settings* 52
Saving the current system settings
Before performing the following operations, set the operation
mode selector on the remote control to CAMP.
Note
4 3 2 1
SYSTEM MEMORY
[ ]/[ ]:
[ENTER]:
[ p
SET MENU
;AUTO SETUP
;MANUAL SETUP
;SYSTEM MEMORY
;SIGNAL INFO
UP/DOWN
Enter
.
[ ]/[ ]:
[ENTER]:
[ p
SYSTEM MEMORY
1 LOAD
2 SAVE
UP/DOWN
Enter
.
[p]/[[]:
[ENTER]:
SYSTEM MEMORY
SAVE;;;;;;;CURRENT
Church in Freiburg
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;PEQ
YPAO PEQ;;;NATURAL
Select
Return
.
Current system parameters