Yamaha RX-V1800 - Manual (Page 98)

94
En
Customizing this unit (MANUAL SETUP)
■ Initial configuration
D)INIT. CONFIG
Use this feature to select the settings of the audio input
jack select, active decoders and extended surround when
you turn on this unit.
Audio select AUDIO SELECT
Use this feature to designate the default audio input jack
select setting (see page 43) for the input sources connected
to the DIGITAL INPUT jacks when you turn on the power
of this unit.
Decoder mode DECODER MODE
Use this feature to designate the default decoder mode
(see page 89) for the input sources connected to the
DIGITAL INPUT jacks when you turn on the power of
this unit.
Extended surround EXTD SUR.
Use this feature to designate the extended decoder mode
(see page 87) for the input sources connected to the
DIGITAL INPUT jacks when you turn on the power of
this unit.
■ Zone set
E)ZONE SET
Use this feature to set the items related in Zone 2 or Zone
3.
Setting zone
Select the zone to set up “AMP”, “VOLUME”, “MAX
VOL.” and “INIT. VOL.”.
Zone 2/Zone 3 amplifier AMP
Use this feature to select how the Zone 2 or Zone 3
speakers are amplified. This parameter also effects the
speaker settings and the sound output of sound field
programs in the main zone.
Choices: EXT, [SP1], [SP2], BOTH
When the speakers in Zone 2 or Zone 3 are
connected to the external amplifier, and the
external amplifier is connected to the ZONE
OUT (ZONE 2 or ZONE 3) jacks of this unit:
Select “EXT”. See “Using external amplifiers” on
page 111 for details.
When “BI-AMP” is set to “ON” in “ADVANCED SETUP”
(see page 120), you can only set “AMP” to “EXT” in
“ZONE 2” or “ZONE 3”.
When the speakers in Zone 2 or Zone 3 is
connected to the SP1 speaker terminals of this
unit directly:
Select “[SP1]”. See “Using the internal amplifiers of
this unit” on page 112 for details.
When you set “AMP” to “[SP1]” in “ZONE 2” or “ZONE
3” and the corresponding zone is turned on, no sound is
output from the surround back speakers.
Choice Functions
AUTO Automatically detects the type of input signals
and selects the appropriate audio input jack
select setting.
LAST Automatically selects the last input jack select
setting used for the connected input source.
Choice Functions
AUTO Automatically detects the type of input signals
and select the appropriate decoder mode setting.
LAST Automatically selects the last decoder mode
setting used for the connected input source.
Choice Functions
AUTO Automatically detects the digital audio input
signals and activates the appropriate decoder.
LAST Automatically selects the last decoder mode set
for “EXTD SUR.” in “SOUND MENU”.
[p]/[[]:
[ENTER]:
D)INIT. CONFIG
AUDIO SELECT;;AUTO
DECODER MODE;;AUTO
EXTD SUR.;;;;;AUTO
Select
Return
.
Choice Functions
ZONE 2 Sets the “ZONE SET” parameters for Zone 2.
ZONE 3 Sets the “ZONE SET” parameters for Zone 3.
Note
Note
[ ]/[ ]:
[p]/[[]:
[ p
E)ZONE SET
>ZONE2 ZONE3
AMP;;;;;;;;;;;;EXT
VOLUME;;;;;;;;;VAR
MAX VOL.;;;-30.0dB
INIT. VOL.;+16.5dB
UP/DOWN
Select
.