Yamaha RX-V1800 - Manual (Page 108)

104
En
Remote control features
You can program remote control codes from other remote
controls. Use the learn feature if you want to program
functions not included in the basic operations covered by
the remote control codes, or an appropriate remote control
code is not available. You can program the function of
other remote control to the buttons in the highlighted areas
in the following illustration. The buttons can be
programmed independently for each input area.
The remote control transmits infrared rays. If the other remote
control also uses infrared rays, this remote control can learn most
of its functions. However, you may not be able to program some
special signals or extremely long transmissions. Refer to the
operating instructions for the other remote control.
1
Set the operation mode selector to
C
SOURCE and then press an input selector
button (1) or to select an input area.
Make sure that the operation mode selector is set to CSOURCE.
When you set the operation mode selector to CAMP and
program a remote control codes from other remote controls, the
programmed key cannot operate the amplifier function of this
unit.
2
Place this remote control about 5 to 10 cm
(2 to 4 in) apart from the other remote control
on a flat surface so that their infrared
transmitters are aimed at each other.
3
Press L
LEARN using a ballpoint pen or
similar object.
“LEARN” and the name of the selected input area
(e.g. “DVD”) appear alternately in the display
window (A) on the remote control.
• Do not press and hold LLEARN. If you hold it down for
more than 3 seconds, the remote enters the remote control
code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 3.
4
Press the button for which you want to
program the new function.
“LEARN” appears in the display window (A) on the
remote control.
Programming codes from other
remote controls
Note
Note
–
+ +
– –
+
MENU TITLE
TV MUTE TV INPUT MUTE
AV TV
ENTER
DISPLAY
AUDIO
MENU TITLE
4 3 2
ENT + 10 0 9
5
1
7 6 8
RETURN
VOLUME CH TV VOL
SRCH MODE
PURE DIRECT PRESET/CH SET MENU
BAND
LEVEL
TV
SOURCE
AMP
SELECT
DTV/CBL VCR DVR V-AUX/DOCK
TUNER CD CD-R MULTI CH IN
POWER POWER POWER STANDBY
SLEEP AUDIO SEL XM
DVD BD/HD DVD PHONO MD/TAPE
ON OFF CLEAR LEARN RENAME MACRO
REC
DISC SKIP
EFFECT
PARAMETER STRAIGHT
XM MEMORY
A-E/CAT.
SRCH MODE
PURE DIRECT PRESET/CH SET MENU
BAND
LEVEL
CLASSICAL LIVE/CLUB ENTERTAIN MOVIE
SYSTEM MEMORY
SUR. DECODE ENHANCER STEREO
Set to
SOURCE
Notes
AV
TV
SELECT
DTV/CBL
V C R
DV
R
V -A U X/DOCK
TUNER
CD
CD-R
MUL
TI CH IN
PO
WER
PO
WER
PO
WER
ST ANDBY
SLEEP
A UDIO SEL
XM
D V D
BD/HD D
V D
PHONO
MD/T
APE
5 to 10 cm (2 to 4 in)
Other remote control
LEARN