Yamaha RX-V1800 - Manual (Page 129)

125
En
Troubleshooting
AD
DITIONAL
INFO
RMA
T
ION
English
■ XM Satellite Radio (U.S.A. and Canada models only)
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
■ HDMI
Status message Cause Remedy
See
page
CHECK ANTENNA XM Mini-Tuner and Home Dock are not
connected to the XM jack of this unit or
do not work properly. Check XM Mini-Tuner and Home Dock connections
and orient for the best reception level. 58
UPDATING The XM user encryption code is being
updated. Wait until the encryption code is updated. —
NO SIGNAL The signal is too weak. Adjust the orientation of the antenna of Home Dock
for the best reception level. 58
LOADING It takes longer than 4 seconds for audio or
text data to be decoded. Wait until the decoding process has finished. —
OFF AIR The XM Satellite Radio channel you
selected is not currently broadcasting any
signals. Check the channel number again or select another
XM Satellite Radio channel. —
<XM> - - - The Channel Station ID (SID) is no longer
available.
- - - / - - - No artist name or song title is available.
<CAT> - - - No channels are available for the selected
category. Select another channel category by pressing
FCATEGORY on the front panel (or 3A-E/CAT.
l / h on the remote control) repeatedly. 60
HDMI ERROR Cause Remedy
See
page
DEVICE OVER The number of the connected HDMI
components is over the limit. Reduce the number of the connected HDMI
components. —
HDCP ERROR HDCP authentication failed. Check that the connected HDMI components support
the HDCP copy protection standards. —
HDMI Message Cause Remedy
See
page
Out of
Resolution The connected video monitor is not
compatible with the resolution of the input
video signal. Set the resolution of the video output signal of the
input source component appropriately. —