Yamaha RX-V1800 - Manual (Page 85)

81
En
Customizing this unit (MANUAL SETUP)
AD
V
ANCED
OPERA
T
ION
English
Surround left/right speakers SUR. L/R SP
Choices: NONE, SMALL, LARGE
When the surround speakers are large:
Select “LARGE” (large).
When the surround speakers are small:
Select “SMALL” (small).
When you do not use the surround speakers:
Select “NONE” (none). This unit is set to the Virtual
CINEMA DSP mode (see page 51), and “SUR.B L/R
SP” is automatically set to “NONE”.
y
See page 17 for the connection information of the surround
back speakers.
Surround back left/right speakers
SUR.B L/R SP
Choices: NONE, SMLx1, SMLx2, LRGx1, LRGx2
When the surround back left and right
speakers are large:
Select “LRGx2” (large x 2).
When the single surround back speaker is
large:
Select “LRGx1” (large x 1).
When the surround back left and right
speakers are small:
Select “SMLx2” (small x 2).
When the single surround back speaker is
small:
Select “SMLx1” (small x 1).
When you do not use the surround back
speakers:
Select “NONE” (none). The surround back channel
signals are directed to the surround left and right
speakers.
y
See page 17 for the connection information of the surround
back speakers.
If the Dolby TrueHD audio signals are input and “SUR.B L/R
SP” is set to “NONE”, the left and right surround back
channels are not directed to the surround left and right
speakers.
Presence speakers PRESENCE SP
Use this feature if you want to use the presence speakers
connected to this unit.
Choices: NONE, YES
When you do not use the presence speakers:
Select “NONE” (none).
When you use the presence speakers:
Select “YES” (yes).
“DIALOG LIFT” is available only when “PRESENCE SP” is set
to “YES”.
Bass cross over CROSS OVER
Use this feature to select the crossover frequency of all the
speakers set to “SML” (or “SMALL”) or to “NONE” in
“SPEAKER SET” (see page 80). All frequencies below
the selected frequency will be sent to the subwoofer or to
the speakers set to “LRG” (or “LARGE”) in “SPEAKER
SET” (see page 80).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
y
If your subwoofer can adjust the output volume and the crossover
frequency, set the volume to about half way (or slightly less) and
set the crossover frequency to the maximum.
Measure for the speaker size
The woofer section of a speaker is
– 16 cm (6.5 in) or larger: large
– smaller than 16 cm (6.5 in): small
A)SPEAKER SET
SUR. L/R SP
NONE >SMALL LARGE
A)SPEAKER SET
SUR.B L/R SP
NONE SMLx1 >SMLx2
Note
Note
A)SPEAKER SET
PRESENCE SP
NONE >YES
A)SPEAKER SET
CROSS OVER
FREQ;;;;80Hz