Yamaha RX-V1800 - Manual (Page 57)

53
En
Using audio features
BA
S
IC
OPERA
T
ION
English
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
This operation will override the level adjustments made in
“Optimizing the speaker setting for your listening room” (see
page 37) and “SPEAKER LEVEL” (see page 82).
1
Press 2
LEVEL on the remote control
repeatedly to select the speaker you want to
adjust.
y
• Once you press 2LEVEL on the remote control, you can
also select the speaker by pressing 3k / n.
• Instead of “SB R” and “SB L”, “SB” is displayed if “SUR.
B L/R SP” is set to either “SMLx1” or “LRGx1” (see
page 81).
2
Press 3l / h on the remote control to
adjust the speaker output level.
• Press 3h to increase the value.
• Press 3l to decrease the value.
Control range: –10.0 dB to +10.0 dB
You can mix down multi-channel sources to 2 channels
and enjoy playback in 2-channel stereo.
Press N
STEREO on the remote control
repeatedly to select “2ch Stereo”.
y
• You can use a subwoofer with this program when “LFE/BASS
OUT” is set to “SWFR” or “BOTH” (see page 80).
• You can also select the “2ch Stereo” mode by rotating the
NPROGRAM selector on the front panel.
• See page 72 for details about the parameters of the “2ch Stereo”
mode.
Before performing the following operation, set the operation
mode selector on the remote control to CAMP.
Adjusting the speaker level
Note
Display Adjusted speaker
FRONT L Front left speaker
CENTER Center speaker
FRONT R Front right speaker
SUR.R Surround right speaker
SB R Surround back right speaker
SB L Surround back left speaker
SUR.L Surround left speaker
SWFR Subwoofer
PRNS L Presence left speaker
PRNS R Presence right speaker
Enjoying multi-channel sources in
2-channel stereo