Yamaha RX-V1800 - Manual (Page 92)

88
En
Customizing this unit (MANUAL SETUP)
■ HDMI set
F)HDMI SET
Use this feature to select the component to play back
HDMI audio signals.
Support audio SUPPORT AUDIO
Use this feature to select whether to play back HDMI
audio signals on this unit or on another HDMI component
connected to the HDMI OUT jack on the rear panel of this
unit.
• This unit transmits audio and video signals input at the HDMI
input jacks to the HDMI out jack only when this unit is turned
on even if “SUPPORT AUDIO” is set to “OTHER”.
• Available audio/video signals depend on the specification of the
connected video monitor. Refer to the instruction manual of
each connected component.
Use this menu to adjust the parameters of each input
source.
Some parameters described above may not be available for all
input sources and some parameters are only available for specific
input sources.
Choice Functions
RX-V1800 Plays back HDMI audio signals on this unit. The
HDMI audio signals input at the HDMI input
jacks of this unit are not output to the HDMI
component connected to the HDMI OUT jack
on the rear panel of this unit.
OTHER Plays back HDMI audio signals on another
HDMI component connected to the HDMI OUT
jack.
Notes
[p]/[[]:
[ENTER]:
F)HDMI SET
SUPPORT AUDIO
RX-V1800
Select
Return
4 INPUT MENU
Input source Parameter
A)XM
(U.S.A. and Canada
models only) INPUT RENAME
VOL. TRIM
ANTENNA LEVEL
B)TUNER INPUT RENAME
VOL. TRIM
C)MULTI CH INPUT RENAME
VOL. TRIM
BGV
INPUT CH
FRONT
D)PHONO
E)CD
F)CD-R
G)MD/TAPE
H)BD/HD DVD
I)DVD
J)DTV/CBL
K)DVR
L)VCR
M)V-AUX I/O ASSIGNMENT
INPUT RENAME
VOL. TRIM
DECODER MODE
N)DOCK INPUT RENAME
VOL. TRIM
STANDBY CHARGE
Note
[ ]/[ ]:
[ENTER]:
[ p
4 INPUT MENU 1/2
A) XM
B) TUNER
C) MULTI CH
D) PHONO
E) CD
F) CD-R
G) MD/TAPE
UP/DOWN
Enter
.
[ ]/[ ]:
[ENTER]:
[ p
4 INPUT MENU 2/2
H) BD/HD DVD
I) DVD
J) DTV/CBL
K) DVR
L) VCR
M) V-AUX
N) DOCK
UP/DOWN
Enter
.