Programming macro operations – Yamaha RX-V1800 User Manual

Page 112

Advertising

108

Remote control features

■ Programming macro operations

You can program your own macro and use the macro
programming feature to transmit several remote control
commands in sequence at the press of a button. Be sure to
set up remote control codes or perform learning operations
before programming the macro.

• The default macro is not cleared when a new macro is

programmed for a button. The default macro can be used again
when the programmed macro is cleared.

• It is not possible to add a new signal (macro step) to the default

macro. Programming a macro changes all macro contents.

• We do not recommend programming continuous operations

such as volume control in a macro.

Set the operation mode selector to C

AMP or

SOURCE and then press LMACRO using

a ballpoint pen or similar object.
“MCR ?” appears in the display window (A) on the
remote control.

If you do not complete each of the following steps within 30
seconds, the macro programming mode will be
automatically canceled. In this case, start over from step 1.

Press the L

MACRO button you want to use

to operate the macro.
The macro button name (e.g. “M;DVD”) and the
selected component name (e.g. “DVD”) appear
alternately in the display window (A) on the remote
control.

“AGAIN” appears in the display window (A) if you press a
button other than a macro button.

Press the buttons for the functions you want
to include in the macro operation in
sequence.
You can set up to 10 steps (10 functions). After you
have set 10 steps, “FULL” appears and the remote
control automatically exits from the macro mode.

Example:
Set the input source to DVD

→

Activate the DVD

player

→ Set the sleep timer

Step 1 (“MCR 1”): Press DVD.
Step 2 (“MCR 2”): Press AV POWER.
Step 3 (“MCR 3”): Press SLEEP.

To change the selected input area, press ASELECT

k / n

Pressing the input selector buttons will program a macro step,
whereas ASELECT

k / n

only changes the selected input

area.

Press L

MACRO again using a ballpoint pen

or similar object when the operation
sequence you want to program is complete.

“ERROR” appears in the display window (A) if you press
more than one button simultaneously.

Notes

Note

MACRO

SOURCE

AMP

SOURCE

AMP

DTV/CBL

VCR

DVR

V-AUX/DOCK

TUNER

CD-R

MULTI CH IN

DVD

BD/HD DVD

PHONO

MD/TAPE

POWER

STANDBY

Note

SELECT