Clean the media compartment and sensors – Zebra Technologies Z SERIES 79695L-002 User Manual
Page 107
Advertising
107
Routine Maintenance
Cleaning Procedures
6/6/08
Z Series
®
/RZ™ Series User Guide
79695L-002 Rev. A
Clean the Media Compartment and Sensors
To clean the media compartment and sensors, complete these steps:
1.
Brush or vacuum any accumulated paper lint and dust away from the media and ribbon
paths.
2.
Brush or vacuum any paper lint and dust away from the sensors (see
).
Figure 17 • Cleaning the Sensors
1
Take-label sensor
2
Ribbon sensor
3
Media sensor
1
3
2
Advertising