Zebra Technologies Z SERIES 79695L-002 - Manual (Page 24)

Printer Setup
Before You Begin 24
79695L-002 Rev. A Z Series ® /RZ™ Series User Guide 6/6/08
Before You Begin
Review this checklist, and resolve any issues before you set up or use your printer.
‰ Unpack and Inspect the Printer Have you unpacked the printer and inspected it for
damage? If you have not, see Unpack and Inspect the Printer on page 25 .
‰ Select a Site Have you selected an appropriate location for the printer? If you have not,
see Select a Site for the Printer on page 26 .
‰ Connect to a Data Source Have you determined how the printer will connect to a
data source (usually a computer)? For more information, see Select a Data
Communication Interface on page 27 .
‰ Attach a Power Cord Do you have the correct power cord for your printer? If you are
unsure, see Power Cord Specifications on page 32 . To attach the power cord and connect
the printer to a power source, see Connect the Printer to a Power Source on page 31 .
‰ Select Media Do you have the correct media for your application? If you are unsure,
see Types of Media on page 33 .
‰ Select Ribbon Do you need to use ribbon, and is the appropriate ribbon available, if
needed? If you are unsure, see Ribbon Overview on page 35 .