Zebra Technologies ZEBRA QL UMAN-QLP-001 - Manual (Page 15)

15
QL Plus Series User Guide
Model UCLI72-4 Quad Charger
The UCLI72-4 Quad Charger is designed to charge up to four
QL series battery packs simultaneously. Batteries must be re-
moved from the printer to be charged in the Quad Charger.
1. Ensure that the charger has been installed properly per
the Quad Charger instruction manual. Ensure that the
power indicator on the front panel is on.
2. Remove any protective shrink-wrap and labels from all
battery packs prior to use. Plug a battery pack into any one
of the four charging bays as shown in Figure 5, noting the
orientation of the battery pack. Slide the battery pack into
the charging bay until it stops and then rock the battery
pack back until it snaps into place. The amber indicator di-
continued
Fault
Fast Ch
arge
Fault
Fast Ch
arge
Fault
Fast Ch
arge
Ready
Power
Full Cha
rge
Ready
Full Cha
rge
Ready
Full Cha
rge
Full Cha
rge Fault
Fast Ch
arge
Ready
Figure 5: Quad Charger
Charger Bay
Amber
Indicator
Green
Indicator
Power Indicator
Power Supply
1. Slide Battery Pack into
Charger bay
2. Rock Battery Pack into place