Cable communication – Zebra Technologies ZEBRA QL UMAN-QLP-001 User Manual

Page 29

Advertising
background image

29

QL Plus Series User Guide

Cable Communication

Caution • The printer should be turned off before connecting or

disconnecting a communications cable.

All QL Plus series printers can communicate by cable; the

specific cable supplied with your printer will vary with the host
terminal and your model printer.

RS-232C Communications

The 8- pin circular connector on your communications cable

plugs into the serial communications port on the side of the
printer. QL Plus model printers also have a USB port.

USB Communications

The small connector on the USB cable plugs into the printer.

The connectors are keyed to assure correct alignment; do not
try to force the cable if it does not plug in. The other end of

Communications Cable to Terminal

Part numbers vary. Refer to Appendix A.

RS-232C or USB Communications

Cable to Computer

Refer to Appendix A for part numbers.

Figure 12: Cable Communications

Figure 13: Communications with a P.C.

Communications

Port

Advertising