Zebra Technologies ZEBRA QL UMAN-QLP-001 - Manual (Page 27)

27
QL Plus Series User Guide
Extended LCD Functions
Function Default setting Scroll & Select Options
Sensor Type Bar
Bar
Gap
Baud Rate 19200
9600
19200
32400
Data Bits 8
7
8
WLAN ID*
Factory Set
Value N/A
Label Top 000
Increase (+120 dots
Decrease (-120 dots max.)
Left Position 000
Increase (+120 dots max.)
Decrease (-120 dots max.)
LCD Contrast 0
Increase
Decrease
No-activity time-out* 60 sec.
60 sec.
5 min.
10 min.
30 min
Custom
Tear-off Position 00
Increase (+120 dots max.
Decrease (-120 dots max.
Media Type Label
Label
Journal
Media Width Sensing† Off
On
Off
Display Width
LCD Backlight Off
On
Off
Momentary On w/ time
delay
Factory Reset
(Resets all to factory
set values)
No
No
Yes
* Some parameters, such as the WLAN ID number and non-standard no-activity time out values can be set
using a PC running Zebra’s Label Vista label creation program and a data cable link to the printer.
† Media width sensing is an option. Display for this option may not be visible, or selection options may
change, depending on the printer’s application.