Zebra Technologies ZEBRA QL UMAN-QLP-001 - Manual (Page 7)

7
QL Plus Series User Guide
Introduction to the QL Plus™ Series
Thank you for choosing one of our Zebra ® QL Plus series
Mobile Printers. These rugged printers are sure to become
productive and efficient additions to your workplace thanks
to their innovative design. Because they are made by Zebra
Technologies, you’re assured of world-class support for all of
your bar code printers, software, and supplies.
• This user’s guide gives you the information you will need
to operate QL Plus series printers.
• QL Plus printers use the CPCL programming language.
To create and print labels using the CPCL language, re-
fer to the Mobile Printer Programming Guide (available at
www.zebra.com/manuals ) and our Label Vista™ label cre-
ation program (available at www.zebra.com/software ).
which are both available on the Zebra Web site .
• QL Plus™ series printers also have EPL and ZPL II pro-
gramming language emulation as a standard feature.
Manuals for the ZPL II or EPL2 label design programming
languages are also available on our Web site .
Unpacking and Inspection
Inspect the printer for possible shipping damage:
• Check all exterior surfaces for damage.
• Open the media cover (refer to “Loading the Media” in
the Getting Ready to Print section) and inspect the media
compartment for damage.
In case shipping is required, save the carton and all packing
material.
Reporting Damage
If you discover shipping damage:
• Immediately notify and file a damage report with the ship-
ping company. Zebra Technologies Corporation is not re-
sponsible for any damage incurred during shipment of
the printer and will not cover the repair of this damage
under its warranty policy.
• Keep the carton and all packing material for inspection.
• Notify your authorized Zebra re-seller.