Zebra Technologies ZEBRA QL UMAN-QLP-001 - Manual (Page 46)

46
QL Plus Series User Guide
Using the Accessories
Belt Clip
Refer to Figure 17. All QL Plus printers are have a belt clip in-
stalled as a standard feature. To use: hook the clip over your
belt, and ensure that the clip is securely attached to the belt.
The belt clip will pivot to allow you to move freely while wear-
ing the printer.
The retainer for the Belt Clip has a strain relief feature which
can be used with the communications cable. Refer to the sec-
tion on Connecting the Printer.
Printer can
pivot freely
Figure 17: Using the Belt Clip
Clip printer to
belt