Figure 7-5, Partial destination address (da) match, Rx legacy traffic i/f – Xilinx IP Ethernet AVB Endpoint v2.4 UG492 User Manual

Page 71: Match pattern register match enable register

Advertising
background image

Ethernet AVB Endpoint User Guide

www.xilinx.com

71

UG492 September 21, 2010

Rx Legacy Traffic I/F

Partial Destination Address (DA) Match

The example illustrated in

Figure 7-5

shows a single MAC Header Filter (one of the eight

provided) configured to filter on a partial Destination Address. In order for the frame to
obtain a match, the initial 29-bits (as used in this example) of the received frame must
exactly match the first 29-bits of the Match Pattern Register.

This functionality is useful for filtering across Multicast group Addresses.

X-Ref Target - Figure 7-5

Figure 7-5:

Filtering of Frames with a Partial DA Match

rx_clk

legacy_rx_data[7:0]

legacy_rx_data_valid

rx_clk_enable

DA

SA

DATA

L/T

VLAN

0xD

A

0x01

0x02

0x0

3

0xFF

0xFF

0xFF

0x1F

0x00

0x00

0x00

0x00

0x00

0x00

0x00

0x00

0x00

0x00

0x00

0x00

Match

against

partial

DA

Don’t-cares

Match Pattern Register

Match Enable Register

Advertising