Yamaha M7CL-32 - Manual (Page 133)

Copying, moving, or initializing a channel
M7CL Owner’s Manual
Grouping and linking
11
133
6
To execute the copy, press the COPY but-
ton.
The copy will be executed, and the settings will over-
write the parameters of the copy-destination chan-
nel(s). After the copy has been executed, the SOURCE
CH field and DESTINATION CHs field will return to
an unset state.
7
To close the CH COPY MODE popup win-
dow, press the CLOSE button.
The settings of a specific input channel can be moved to a
different input channel. When you execute a Move opera-
tion, the numbering of the channels between the move-
source and move-destination will move forward or back-
ward by one.
You can move settings between the following combina-
tions of channels.
• Between INPUT channels
• Between ST IN channels
1
In the function access area, press the CH
JOB button to access the CH JOB menu.
2
Press the MOVE button to access the CH
MOVE MODE popup window.
This popup window lets you move channel settings.
1 SOURCE CH field
This indicates the move-source channel. You can press
this field to cancel the channel that is shown.
B DESTINATION CH field
This indicates the move-destination channel. You can
press this field to cancel the channel that is shown.
C MOVE
Executes the move.
3
To select the move-source channel, press
the corresponding [SEL] key to make it
light.
The corresponding channel is highlighted in the
SOURCE CH field of the window.
When you select the move-source channel, the DES-
TINATION CH field will automatically be embold-
ened, allowing you to select the move-destination.
If you want to re-select the move-source channel,
press the SOURCE CH field.
4
To select the move-destination channel,
press the corresponding [SEL] key to make
it light.
The corresponding channel is highlighted in the DES-
TINATION CH field of the window. The channels that
can be selected will depend on the channel you
selected in step 3.
If you want to defeat the selected move-destination
channel, press the DESTINATION CH field.
5
To execute the move, press the MOVE but-
ton.
The settings of all channels between the move-source
and move-destination will shift toward the move-
source by one channel, and the channel settings will
move from the move-source to the move-destination.
When the Move has been executed, the SOURCE CH
field and DESTINATION CH field will return to an
un-set state.
6
To close the CH MOVE MODE popup win-
dow, press the CLOSE button.
Moving the parameters of a
channel
1 2 3 4 5
1 5 2 3 4
Move
Move by one
MOVE button
1
3
2
• Settings for the Move operation can be made only in the order
of “move-source” → “move-destination.”
NOTE