Yamaha M7CL-32 - Manual (Page 169)

Using the MBM7CL meter bridge (option)
M7CL Owner’s Manual
Meters
15
169
If the optional meter bridge (MBM7CL) is installed in the M7CL, you will always be able to view
the output levels of MIX channels and MATRIX channels.
The MBM7CL’s meters show the MIX channel and
MATRIX channel output levels in 12-segment steps
(OVER, -3dB, -6dB, -9dB, -12dB, -15dB, -18dB, -24dB,
-30dB, -40dB, -50dB, -60dB). You can select the metering point (the point at which the
level is detected) from the following choices. To change
the metering point, refer to the preceding section “Opera-
tions in the METER screen” (
→
p. 168).
• PRE EQ .......... Immediately before the attenuator
• PRE FADER ... Immediately before the fader
• POST ON ....... Immediately after the [ON] key
Using the MBM7CL meter bridge (option)
MIX channels MATRIX channels
• For details on installing the meter bridge (MBM7CL), refer to p. 300.
HINT