Centralogic section (p. 21) – Yamaha M7CL-32 User Manual
Page 21
Top panel
P
anels and controls
21
M7CL Owner’s Manual
2
In this section you can control a group of (up to) eight
channels or DCA groups selected in the NAVIGATION
KEYS section.
1
Multi-function encoders
According to the type of screen that is currently selected,
these encoders control the knobs selected in the touch
screen.
B
[SEL] key
These keys select the channel to be controlled. When you
press this key to make the LED light, that channel will be
selected for control in the SELECTED CHANNEL sec-
tion and in the touch screen.
C
[CUE] key
These keys select the channel to be cue-monitored. If cue
is on, the LED will light.
D
Meter LEDs
These LEDs indicate the input/output level of the channel.
E
[ON] key
This switches the channel on/off. If a channel is on, the
key LED will light.
F
Fader
This adjusts the input/output level of the channel. You can
also make internal settings (
are used as controllers to adjust the gain of each GEQ
band.
■
USB storage device capacities and formats
The operation of storage media with capacities of
up to 16GB has been verified. (However, this does
not necessarily guarantee the operation of all USB
storage media.) The FAT12, FAT16 and FAT32 for-
mats are supported. On the M7CL V1.12 or higher,
storage media with a capacity of 4GB or larger will
be formatted in FAT32 and storage media with a
capacity of 2GB or smaller will be formatted in
FAT16.
■
Prevention of accidental erasure
Some USB storage devices have a write protect
setting that lets you prevent data from being erased
accidentally. If your storage device contains impor-
tant data, it’s a good idea to use the write protect
setting to prevent accidental erasure.
On the other hand, you’ll need to make sure that
your USB storage device’s write protect setting is
turned off before you save data.
• An ACCESS indicator is shown in the function access area
while data is being accessed (saved, loaded, or deleted). Do
not disconnect the USB connector or power-off the M7CL
while this indicator is shown. Doing so may damage your stor-
age media, or may damage the data in the M7CL or on your
media.
CAUTION
■ Centralogic section
2
1
3
4
5
6