Yamaha M7CL-32 - Manual (Page 152)

M7CL Owner’s Manual
Using the Fade function
152
5
Use the multifunction encoders corre-
sponding to the FADE TIME knobs to adjust
the fade time.
The range is 0.0 sec – 60.0 sec.
When you’ve finished making settings, press the
CLOSE button to close the FADE TIME popup win-
dow.
6
To enable the Fade function, press the FAD-
ING button.
The Fade on/off setting is made individually for each
scene.
7
Recall a scene for which the Fade function
is turned on.
The faders will begin to move immediately after
Recall occurs, and will reach the values of the recalled
scene over the course of the specified fade time.
• The fade time you specify here is used for all channels and
DCA groups selected in step 4.
HINT
• Scenes for which Fade settings are made are shown by a
“FADING” indication in the STATUS field of the SCENE LIST
window.
HINT
• The Fade function settings can be applied individually even if
faders are linked by Channel Link.
NOTE
• By stopping a moving fader while you hold down the corre-
sponding [SEL] key, you can stop the fade operation of the
fader at that point.
• If you recall the same scene while faders are moving, the fad-
ers of all channels and DCA groups will move immediately to
their target positions.
HINT