Yamaha M7CL-32 User Manual
Page 213
User Level settings
M7CL Owner’s Manual
User settings (Secur
ity)
18
213
3
Press the USER LEVEL tab to access the
USER LEVEL page.
If you are logged-in as the Administrator, you can
switch to the USER LEVEL for GUEST page, and
view or change the user level of the Guest account.
This page includes the following items.
1 CH OPERATION
Here you can specify (for each channel) the operations
that will be permitted for input channels, output chan-
nels, and DCA groups. The settings will apply to the
currently selected channel. Settings for currently-
selected channels will be displayed below the CH
OPERATION section. Use the panel [SEL] keys or the
Selected Channel field in the function access area to
select the channel for which you want to make set-
tings.
• HA...................Restricts operation of the HA (Head
Amp) patched to that channel.
• PROCESSING
...........Restricts operation of all signal pro-
cessing parameters for that channel
(except for fader, [ON] key, send
level, etc.)
• FADER / ON ...Restricts operation of that channel’s
fader, [ON] key, send level, etc.
• SET BY SEL ...If this button is on, a group of multi-
ple channels can be set to the same
settings in a single operation. To
select channels, turn this button on,
and then press the [SEL] keys of the
desired channels on the panel. If
you change the setting of any chan-
nel in the group, the change will
affect all channels in the group.
Channels that have the same set-
tings are shown with the same color
in the channel display field.
B CURRENT SCENE
This specifies the operations that can be performed on
the current scene memory.
• INPUT PATCH / NAME
...........Operations for input channel patch-
ing and names will be restricted.
• OUTPUT PATCH / NAME
...........Operations for output channel
patching and names will be
restricted.
• BUS SETUP ...Operations for bus setup will be
restricted.
• RACK 1–8 ...... Operations for the racks (1–8) will
be restricted.
However, there will be no restriction
on operating the MIDI CLK button
displayed for delay-type and modu-
lation-type effects, or the PLAY/REC
button displayed for the FREEZE
effect.
• MUTE GROUP ASSIGN / MASTER
........... Operations for mute group assign-
ment and mute group master will be
restricted.
C SCENE LIST
This specifies the operations that can be performed on
scene memories.
• STORE / SORT operations
• RECALL operations
D LIBRARY LIST
This specifies the operations that can be performed on
libraries.
• STORE / CLEAR operations
• RECALL operations
E FILE LOAD
This specifies the types of file that can be loaded from
a USB storage device. The user authentication key
contains the user level, user-defined keys, and prefer-
ence settings. Other data is saved in an “ALL” file.
• USER SETUP (user-defined keys and preference set-
tings)
• SYSTEM SETUP / MONITOR SETUP
• CURRENT SCENE
• SCENE LIST
• LIBRARY LIST
F MONITOR SETUP
This specifies the monitor setup operations that can be
performed.
• OSCILLATOR
• TALKBACK
G SYSTEM SETUP
This specifies the system setup operations that can be
performed.
• MIXER SETUP
• OUTPUT SETUP
• MIDI
• STAGE BOX SETUP
H SET ALL/CLEAR ALL button
This button permits/clears all items.
4
Specify the user level by pressing the but-
ton for each item that will be permitted.
5
When you have finished making settings,
close the popup window and press the
SETUP button in the function access area.
• For the channel parameters included in PROCESSING, refer
HINT