Yamaha M7CL-32 - Manual (Page 219)

Using a USB storage device to save/load data
M7CL Owner’s Manual
User settings (Secur
ity)
18
219
Here’s how to load a M7CL setting file (.M7C) from the
USB storage device on which it was saved.
You can also load M7CL V1 and V2 files.
If you load an MCL-32/48 file into the M7CL-48ES, or an
M7CL-48ES file into the M7CL-32/48, the patch settings
will change as shown in the table below.
If you plan to load a file created by the M7CL V3 or later,
convert the file if necessary. For more information on con-
verting the file, please refer to “Converting and loading
the file content from a USB storage device” (
→ p. 220)
* The same HA settings will be used.
1
In the function access area, press the
SETUP button to access the SETUP screen.
2
Press the SAVE/LOAD button to access the
SAVE/LOAD popup window.
3
To select the file you want to load, press the
desired file in the file list, or turn multifunc-
tion encoder on the panel.
The highlighted line in the file list indicates the file
that is selected for operations.
4
Press the LOAD button, and a confirmation
dialog box will appear.
5
Press the OK button to begin loading the
file.
When the file has finished being loaded, the popup
window showing the progress indication and the type
of data will close. Even if you cancel during this pro-
cedure, the data up to that point will have been loaded.
Some setting data may not be loaded, depending on
the USER LEVEL setting during the load operation.
M7CL-32/48 + STAGE BOX M7CL-48ES
INPUT 1–16 ↔* ES IN 1–16
INPUT 17–32 ↔* ES IN 17–32
INPUT 33–48 ↔* ES IN 33–48
ST IN 1L–4R ↔ OMNI IN 1–8
SLOT1 IN 1–16 ↔ SLOT1 IN 1–16
SLOT2 IN 1–16 ↔ SLOT2 IN 1–16
SLOT3 IN 1–16 ↔ SLOT3 IN 1–16
TALKBACK ↔ TALKBACK
OMNI OUT 1–16 ↔ ES OUT 1–16
No assign ↔ ES OUT 17–24
No assign ↔ OMNI OUT 1–8
SLOT1 OUT 1–16 ↔ SLOT1 OUT 1–16
SLOT2 OUT 1–16 ↔ SLOT2 OUT 1–16
SLOT3 OUT 1–16 ↔ SLOT3 OUT 1–16
2TR DIGITAL OUT ↔ 2TR DIGITAL OUT
Loading a file from a
USB storage device
SAVE/LOAD button
File list LOAD button