Zebra Technologies ZEBRA Z4M H-974 - Manual (Page 37)

H-974
PAGE 37 OF 57 0808 IH-974
52 Zebra Z4M Printer User’s Guide
Display Shows Action/Explanation
WEB S.
These parameters are automatically set during the calibration procedure. They
should only be changed by a qualified service technician. Refer to the
maintenance manual for more information on these parameters.
Press the SELECT key repeatedly to skip these parameters.
MEDIA S.
RIBBON S.
TAKE LABEL S.
MEDIA LED
RIBBON LED
LCD ADJUST
LCD Display Adjustment Press the DECREMENT (-) key to decrease the value
(reduce brightness), press the INCREMENT (+) key to increase the value
(increase brightness).
Range: 00 to 19
This parameter allows you to adjust the brightness of your display if your
display is difficult to read.
FORMAT CONVERT
Format Convert Press the INCREMENT (+) or DECREMENT (-) key to display
other choices.
Default: None
Selections: None, 150 � 300, 150 � 600, 200 � 600, 300 � 600
Selects the bitmap scaling factor. The first number is the original dots per inch
(dpi) value; the second, the dpi to which you would like to scale.
PASSWORD LEVEL
Password Level Press the INCREMENT (+) or DECREMENT (-) key to display
other choices.
Default: Selected items
Selections: Selected items, all items
This parameter allows you to select whether certain Zebra-selected menu
items (”selected items”) or all menu items (”all items”) are password protected.