Zebra Technologies ZEBRA Z4M H-974 - Manual (Page 45)

H-974
PAGE 45 OF 57 0808 IH-974
Cleaning the Value Peel-Off Module
(Value peel-off option required)
Perform the following procedure if adhesive buildup begins to affect peel-off
performance.
Refer to Figure 25.
1. Open the printhead assembly.
2. Open the pivot bracket assembly by pivoting the module toward you.
3. Use a swab soaked with the Zebra-recommended solvent to remove adhesive
from the tear-off/peel-off bar.
4. Manually rotate the pinch roller and clean thoroughly with solvent and a swab.
5. Close the pivot bracket assembly.
6. Close the printhead assembly.
Zebra Z4M Printer User’s Guide 59
Printhead
assembly
Pinch
roller
Tear-off/
peel-off
bar
Pivot
bracket
assembly
Figure 25