ROWENTA SILENCE FORCE UPGRADE RO4627 - Manual (Page 15)

15
1 • Remove packaging
Unpack your appliance and remove any labels. Keep
your warranty card and carefully read the operating
instructions before using your appliance for the first time.
2 • Hints and precautions
Before each use the supply cord should be
completely unwound. Do not allow it to become
trapped or be pulled over sharp edges. If you use
an extension cord, make sure that it is in perfect
condition and appropriate to the power rating of
your appliance. Never unplug the appliance by
pulling on the cord.
Never operate the vacuum cleaner without a bag
and without a filtration system (cassette).
Your appliance is equipped to that end with a safety
system to ensure the filter cassette is present.
Do not move the vacuum cleaner by pulling its cord,
the appliance must be moved by its carrying handle.
Never lift the appliance by its cord use the carrying
handle. Stop and unplug the appliance after each
use. Always turn off and unplug your appliance
before maintenance or cleaning. Only use Rowenta
bags and filters.
Use only Rowenta or Wonderbag bags and filters.
Check that all the filters are properly in place. In the
case of difficulty in obtaining accessories and filters for
this vacuum cleaner, contact the Rowenta customer
service department (see last page for contact details).
This appliance is not intended for use by people
(including children) whose physical, sensory or
mental capacities are impaired, or by people with no
experience or familiarity with such devices, unless
they are supervised by a person who is responsible
for their security or have received instructions as to
how to use the appliance.
Children must be supervised to ensure that they do
not play with the appliance.
BEFORE USING FOR THE FIRST TIME
Thanks to the Silence System (an
exclusive Rowenta system) your
vacuum cleaner makes much less noise
when vacuuming.
1 • Assembling the elements
of the appliance
Push the hose into the vacuum opening
(fig.1) and turn to lock. To remove it, turn
in the opposite direction and pull. Attach
the accessory clip to the tube and place the
accessories on it. The accessory support sits
on the tube; the accessories can be taken off
the support, which remains attached to the
tube
(fig.2) .
Assemble the telescopic tube*. Adjust the
desired length on the tube
(fig. 4) . If your
appliance is equipped with the Compact
System with folding tubes:
(fig. 3) .
• To use, unfold the 2 tubes until you hear a
«click». Set to the desired length.
Fit the desired accessory onto the end of the
tube
(fig. 5) :
• For rugs and wall-to-wall carpeting: use
the nozzle with brushes lifted.
• For parquets and smooth flooring: use the
nozzle with the brush extended or use the
parquet nozzle*.
• For corners and other areas that are
difficult to reach: use the crevice tool*.
• For furniture: use the brush* or the furniture
crevice tool*.
2 • Plugging in the electrical
power cord and using the
vacuum cleaner
Fully unroll the cord, plug in your vacuum
cleaner and press the On/Off pedal,
(fig.6) .
Set the power using the vacuum cleaner’s
power control, if your model is equipped
with a High Control wand
(fig.7) you can
also adjust the vacuum power using the 3
position slider* :
• Position for fabrics
and furniture (fig.7) .
• Position for parquets and smooth
flooring (fig.7) .
• Position for rugs and wall-to-wall
carpeting (fig.7) .
IMPORTANT If the vacuum suction unit is
hard to move, reduce the vacuum power
on your appliance using the electronic
power control on the vacuum cleaner.
IMPORTANT Never operate the vacuum
cleaner without a bag and without a
filtration system (cassette).
IMPORTANT Always stop and unplug
your vacuum cleaner before changing
accessories.
*Depending on model: this is either equipment specific to certain models or available as an optional accessory.
GB
UTILISATION