Emergency crank, Optional bed rails, Emergency crank optional bed rails – Activeforever Invacare Bariatric Electric Hospital Bed (Bariatric Home Care Hospital Bed) User Manual
Page 17
SECTION 2—OPERATION AND ADJUSTMENT
17
Emergency Crank
NOTE: For this procedure, refer to FIGURE 2.4.
NOTE: If the bariatric bed must be adjusted manually due to a power outage or an electronic
malfunction, use the emergency crank to make the adjustments.
1. Under the bed, locate the exposed shaft end according to the function you want to
perform.
2. Attach the emergency crank to the motor shaft end of the head section or the motor
shaft end of the foot section.
3. Crank clockwise or counterclockwise to adjust the bed.
NOTE: Push in the emergency crank while turning it the desired direction.
4. Remove the emergency crank.
ƽ WARNING
The emergency crank MUST be removed before the bed is used. Failure to remove
the crank may cause damage or personal injury.
FIGURE 2.4 Emergency Crank
Optional Bed Rails
ƽ WARNING
DO NOT install the optional bed rails without reading and understanding all of the
instructions in the instruction sheet that accompanies the bed rail kit.
Head Section
Foot Section
Motor Shaft End
(Head Section)
Motor Shaft End
(Foot Section)
Emergency Crank
NOTE: Bottom of bed shown.