Activeforever Invacare Bariatric Electric Hospital Bed (Bariatric Home Care Hospital Bed) - Manual (Page 32)

SECTION 5—PACKAGING, HANDLING AND SET-UP
IVC™ Bariatric Bed 32 Part No 1123842
Inspecting the Bed
ƽ WARNING
The removal and installation of cables are to be performed by a qualified technician.
All motors, the junction box, connectors and wiring are located on the foot and
head sections.
NOTE: For this procedure, refer to FIGURE 5.9.
NOTE: All connectors will arrive plugged into the junction box.
1. Check all electrical connections on junction box at foot end to ensure that all motors
are plugged into the correct locations.
2. Plug the junction power box cord into a 110-volt outlet.
FIGURE 5.9 Inspecting the Bed
Storing the Beds
ƽ WARNING
DO NOT place other objects on top of the cartons.
If bed is not being assembled immediately, retain the cartons and packaging for storage
until ready for assembly.
Store the Invacare homecare bed in a dry area.
Power Cord
Pendant and Cord
Full-Electric
Junction Box
Foot Motor
Connector
Power Cord
Connector
Head Motor
Connector
Hi/Lo Motor
Connector
Pendant Cord
Connector
Pull Tube