Activeforever Invacare Bariatric Electric Hospital Bed (Bariatric Home Care Hospital Bed) User Manual
Page 27
SECTION 5—PACKAGING, HANDLING AND SET-UP
27
NOTE: ALWAYS locate locking caster in the same location on each bed end so that they will always
be assembled diagonally opposite each other when inventory is mixed.
NOTE: Position the two locking casters so that they will be diagonally opposite from one another
when the bed is assembled.
NOTE: If two locking casters are not included with the bed, contact an Invacare dealer.
1. To install casters, lay the bed ends flat on the floor.
2. Insert the caster shaft into the caster socket.
3. To prevent excess movement of the bed during assembly, lock each of the two locking
casters by pushing down on the caster lock.
NOTE: Locking the casters may not prevent the bed from moving on slick or slippery surfaces.
4. To unlock each of the two locking casters, push down on the caster lock labeled off.
FIGURE 5.5 Installing Casters
Caster Socket
Caster Shaft
Non-Locking Caster
Locking Caster
Caster
Socket
Caster
Shaft
Universal Bed End
Unlocked
Locked
Locking
Caster
Locking
Caster