Activeforever Invacare Bariatric Electric Hospital Bed (Bariatric Home Care Hospital Bed) - Manual (Page 31)

SECTION 5—PACKAGING, HANDLING AND SET-UP
Part No 1123842 31 IVC™ Bariatric Bed
8. Release the Hi/Lo motor output shaft spring-loaded coupler by pushing in against the
Hi/Lo motor output shaft spring-loaded coupler and turning clockwise.
NOTE: The coupling will release and engage the foot end top gear box output shaft cross pins.
9. Ensure that all components are securely installed.
ƽ WARNING
Close the drive shaft covers over all drive shafts that are not in use before placing
the bed in service. Otherwise, damage or injury may occur.
FIGURE 5.8 Assembling/Installing/Removing Drive Shaft
FOOT END
HEAD END
Bed End
Hi/Lo Motor Output Shaft
Spring-Loaded Coupler
Top Gear Box Output
Drive Shaft
DETAIL “A”
Hi/Lo Motor Output Shaft
(Full Electric Only)
Hi/Lo Motor Output Shaft
Spring-Loaded Coupler
Locked Position
Drive Shaft
Unlocked Position
Drive Shaft
Hi/Lo Motor Output Shaft
(Full Electric Only)
Hi/Lo Motor Output Shaft
Spring-Loaded Coupler
Hi/Lo Motor
Top Gear Box Output
Drive Shaft
Bottom Gear Box
Output Drive Shaft
(Covered)
Output Side
Drive Shaft Cover
Gear Box
Input Side
Input Drive Shaft
(Covered)
Gear Box