VEGA VEGAPULS 56K - Manual (Page 63)

VEGAPULS 56K 63
22915-EN-041227
0 1 2 3 4 5
Jahre
T
proof
= 1 Jahr
T
proof
= 3 Jahre
T
proof
= 5 Jahre
0,00·10
-2
0,24·10
-2
0,48·10
-2
PFD
avg
0,36·10
-2
0,60·10
-2
0,12·10
-2
Supplement
6 Safety-related characteristics
The failure rate of the electronics and the antenna system was determined by an FMEDA (Fail-
ure Mode, Effects and Diagnostics Analysis) acc. to IEC 61508. The number values are based
on an output current tolerance of max. 2 %.
Architecture 1oo1D SIL 2
VEGAPULS 51 Overfill protection Dry run protection Individual level
VEGAPULS 52
VEGAPULS 53
VEGAPULS 54
VEGAPULS 56
HFT 0
SFF > 86%
PFD
avg
1) < 0.12 •10 -2 with T
Proof
= 1 year 2)
< 0.60 •10 -2 with T
Proof
= 5 years
PFH [1/h] 3) < 0.28 •10 -6
Failure reaction time T
Reaction
= 60 sec
Max
Min
1) PFD
avg
this value correlates almost linearly to the operating time. It is only valid for the corresponding
selection circuit.
2) T
Proof
is the interval after which a periodically recurring complete function test (to check the safety function)
must be carried out.
3) PFH is valid for the stated Failure reaction time T
Reaction
of the measuring system. This means that the failure
tolerance time of the complete system must be higher than T
Reaction
.