8 dismounting, 1 dismounting steps, 2 disposal – VEGA VEGASOURCE 35 User Manual

Page 43

Advertising
background image

43

8 Dismounting

VEGASOURCE 35 •

38132-EN-130415

8 Dismounting

8.1 Dismounting steps

As soon as a radiation-based measuring system is no longer re-

quired, the radiation must be switched off on the source holder.
The source holder must be dismounted by following all relevant regu-

lations and stored in a lockable room without through traffic.
Inform the responsible authorities of this measure.
The access area to this storage room must be measured (µSv/h) and

marked. The theft protection belongs to the responsibility of the radia-

tion safety officer.
Care must be taken that the source in the source container is not

scrapped together with the system.
Arrange as soon as possible a return shipment.
Caution:

Dismounting must only be carried out by authorized, qualified person-

nel monitored for radiation exposure according to local legislation

or the handling permit. Take note of the specifications of the existing

handling permit.
All local conditions must be taken into account.
All work must be carried out in the shortest possible time and at the

largest possible distance (shielding). Also, the endangering of other

persons must be avoided through suitable measures (e.g. safety

fence, etc.).
The source container may only be dismounted when the radiation is

switched off. Make sure that the switch position OFF is secured by a

lock.
Note chapters "Mounting" and "Setup" for dismounting and carry out

the described steps in reverse order.

8.2 Disposal

Federal Republic of Germany

Contact your responsible sales engineer to organise the return for

checking on reuse or disposal.
Other countries

Contact your responsible sales engineer or authority to organise the

return for checking on reuse or disposal.
If a return in your country is not possible, you have to agree the further

proceeding with the respective sales partner.
The destination airport for a probable return shipment is Frankfurt,

Germany.
Conditions for a return shipment

The following conditions must be fulfilled before a return shipment:

Advertising