VEGA MINITRAC 31 Profibus PA User Manual
Page 45
45
6 Set up with the display and adjustment module
MINITRAC 31 • Profibus PA
43836-EN-131119
•
Linearization - Modify
You can also modify individual linearization points.
After editing, you have to activate the complete value pair so that the
linearization point will be effective.
You recognize active linearization points by a small square with a
cross next to the number of the linearization point.
Since the adjustment is very comprehensive, the menu points of
Function Blocks 1 (FB1) were put together in a submenu.
In menu item"Channel" you determine which measured value the
output refers to.
In menu item "Scaling unit" you define the scaling variable and the
scaling unit for the pulse rate on the display, e.g. volume in percent.
In menu item "Scaling" you define the scaling format on the display
and the scaling of the measured values for 0 % and 100 %.
Measured value min.
Setup - AI FB1
Setup - AI FB1 - Channel
Setup - AI FB1 - Scaling
unit
Setup - AI FB1 - Scaling