VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) Profibus PA Approval according to LPR radio standard - Manual (Page 41)

-
Large distance to the medium
-
Large angles of repose
Bunker with fast filling:
l Vessel of concrete or metal, also multiple chamber silo:
-
Structured vessel walls
-
Installations present
l Process/measurement conditions:
-
Measured value jumps, e.g. by truck loading
-
Large distance to the medium
-
Large angles of repose
Heap:
l Sensor mounting on movable conveyor belts
l Detection of the heap profile
l Height detection during filling
l Process/measurement conditions:
-
Measured value jumps, e.g. by the profile of the heap or
traverses
-
Large angles of repose
-
Measurement near the filling stream
Crusher:
l Vessel: installations, wear and protective facilities available
l Process/measurement conditions:
-
Measured value jumps, e.g. by truck loading
-
Fast reaction time
-
Large distance to the medium
Demonstration:
l Adjustment for all applications which are not typically level
measurement
l Sensor accepts all measured value changes within the measuring
range immediately
l Typical applications:
-
Instrument demonstration
-
Object recognition/monitoring (additional settings required)
Through this selection, the sensor is adapted optimally to the
application or the location and measurement reliability under the
various basic conditions is increased considerably.
Enter the requested parameters via the appropriate keys, save your
settings with [OK] and jump to the next menu item with the [ESC] and
the [->] key.
Also the vessel form can influence the measurement apart from the
medium and the application. To adapt the sensor to these measure-
ment conditions, this menu item offers you different options for vessel
bottom and ceiling in case of certain applications. Setup/Vessel form
VEGAPULS 62 • Approval according to LPR radio standard 41
6 Set up with the indicating and adjustment module
41720
-
EN
-120301