VEGA VEGAFLEX 81 HART - integrated accumulator - Manual (Page 35)

35
6 Set up with the display and adjustment module
VEGAFLEX 81 • HART - integrated accumulator
44640-EN-130430
Since the scaling is very comprehensive, the scaling of the level value
was divided into two menu items.
In menu item "Level 1" you define the scaling size and the scaling unit
for the level value on the display, e.g. volume in l.
In menu item "Level 2" you define the scaling format on the display
and the scaling of the level measured value for 0 % and 100 %.
Since scaling is very extensive, the scaling of the interface value was
divided into two menu items.
In menu item "Interface 1" you define the scaling size and the scaling
unit for the interface value on the display, e.g. volume in l.
You can accept the scaling of the level measurement also for the
interface measurement. If you select "Yes", the current setting is
displayed.
If you have selected "No", you can enter the scaling for the interface
separately.
Setup/Scaling Level
Setup/Scaling Level 1
Setup/Scaling Level 2
Setup/Scaling Interface
Setup/Scaling Interface
(1)