VEGA VEGAFLEX 81 HART - integrated accumulator - Manual (Page 46)

46
6 Set up with the display and adjustment module
VEGAFLEX 81 • HART - integrated accumulator
44640-EN-130430
Menu item Default value
Device memory - Meas-
ured value memory
- Recording with meas-
ured value difference
15 %
Device memory - Meas-
ured value memory
- Start with measured
value
Not active
Device memory - Meas-
ured value memory
- Stop with measured
value
Not active
Device memory - Meas-
ured value memory
- Stop recording when
memory is full
Not active
Additional settings
Menu item Default value
PIN 0000
Date Actual date
Time Actual time
Time - Format 24 hours
Probe type Device-specific
The instrument settings are copied with this function. The following
functions are available:
•
Read from sensor: Read data from sensor and store into the
display and adjustment module
•
Write into sensor: Store data from the display and adjustment
module back to the sensor
The following data or settings for adjustment of the display and ad-
justment module are saved:
•
All data of the menu "Setup" and "Display"
•
In the menu "Additional adjustments" the items "Reset, Date/Time"
•
Special parameters
The copied data are permanently saved in an EEPROM memory in
the display and adjustment module and remain there even in case of
power failure. From there, they can be written into one or more sen-
sors or kept as backup for a possible electronics exchange.
Additional adjustments -
Copy instrument settings