Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 140)

140
Chapter 4 EMULATION Menu
Italic Print
• Disable (factory default). Text is printed normally.
• Forward Slant . Text is printed with a forward slant.
• Backward Slant . Text is printed with a backward slant.
Slashed Zero
This parameter allows you to print the numeral “0” with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
• Disable (factory default). Zero is printed without a slash.
• Enable . Zero is printed with a slash.
DBCS/ASCII Mode (H-Series)
• DBCS Mode (factory default). The printer is in DBCS mode. It can print
double-byte characters as well as a limited number of single-byte
characters.
• ASCII Mode . The printer is in ASCII mode. It can only print single-byte
characters.
DBCS ASCII Style (H-Series)
This parameter allows you to specify the appearance of the single-byte
alphanumeric characters in DBCS mode.
• Normal (factory default).
• Oversize . The alphanumeric characters will appear larger than normal
single-byte characters. For example, the appearance of character “8” will
be changed to “8”.
• OCRB . The alphanumeric characters will print in OCRB style. It only
takes effect on LQ typeface for Hanzi/Kanji printer.
• Normal Thin . The alphanumeric characters will be slightly thinner
compared with Normal style. This is only applicable for Hangul printer.