Graphics quality, Barcode quality, Barcode speed – Printronix P8000 Series Cartridge Ribbon Printer User Manual
Page 199: Barcode size, Early print comp (complete)
IPDS Emulation
199
Graphics Quality
This parameter chooses the print quality of graphics.
•
High
(factory default). Graphics are printed at 144 dot rows per inch.
•
Select By Host
. The application decides the quality of the graphics.
•
Low
. Graphics are printed at 72 dot rows per inch.
Barcode Quality
This parameter chooses the horizontal print quality of barcode labels.
•
High
(factory default). Label is printed at 144 dots per inch.
•
Select By Host
. The application decides the quality of the labels.
•
Low
. Label is printed at 72 dots per inch.
Barcode Speed
This parameter chooses the vertical print quality of barcode labels.
•
High
(factory default). Barcodes are printed with less vertical dots,
increasing printing speed, but decreasing print quality.
•
Select By Host
. The application decides the quality of the labels.
•
Low
. Barcodes are printed with more vertical dots, decreasing printing
speed, but increasing print quality.
Barcode Size
This parameter will emulate the barcode sizes of the selected printer model.
•
4234
(factory default). IBM 4234
•
67XX
. Decision Data 67XX
•
64XX
. IBM 6400 series
•
4224
. IBM 4224
Early Print Comp (Complete)
This parameter chooses when to send a Print Comp to the controller.
•
Off
(factory default). Print Comp is sent if page is printed completely.
•
On
. Print Comp is sent immediately. The next page will be created. This
improves the print performance when starting the next page.
NOTE:
When Early Print Comp is enabled and an error occurs, you may lose
data.