Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 328)

328
Appendix A Paper Specifications
Paper Specifications
Labels
Type: Edge-perforated, fan-fold, 3 to 17 inches (7.62 to 43.18 cm)
wide, 2 to 12 inches (5.08 to 30.48 cm) long.
SureStak Power Stacker option works with forms 5 to 12 inches
(12.7 to 30.48 cm) long and up to 16 inches (41 cm) wide with-
out the paper tent or 15.5 inches (39.5 cm) wide with the paper
tent installed.
Thickness:
Single-part: 15 to 100 pound (56 to 163 g/m
2
) stock;
Multi-part: 1- to 6-part forms
Sheet Thickness: 0.025 inch (0.064 cm) maximum
Drive: Adjustable tractors (6-pin engagement)
On Backing: One-part continuous perforated fanfold back form. Labels must be placed at
least 1/6 inch (0.42 cm) from the fan-fold perforation. Backing adhesive must not
be squeezed out during printing.
Sheet Size: 3 to 17 inches (7.62 to 43.18 cm) wide, including the two standard perforated
tractor feed strips. A maximum sheet length of 16 inches (40.64 cm) between
top and bottom perforations.
NOTE: A 16 inch rear door is needed for the cabinet model. Power Paper
Stacker option is 5 to 12 inches (12.7 to 30.48 cm) long.
Thickness: Not to exceed 0.025 inch (0.064 cm) (including backing sheet)