Snap-On 5000-3 - Manual (Page 32)

SETUP AND PROGRAMMING CHAPTER 3
1. Press Setup
2. Scroll Down (
↓) to select Edit Parameters
3. Press Enter (
↵) the display read:
4. Press
--> (F4) and <-- (F5) keys to select parameter to change.
5. Use Left (
←) and Right (→) cursors to select digit to change.
6. Use Up (
↑) or Down (↓) cursors to increment or decrement digit.
7. Press Enter (
↵) to accept changes and return to measurements mode.
3-9