R&M Materials Handling VARIABLE SPEED CONTROLS ControlMaster Select Service Manual - Manual (Page 17)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
17/46
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
5 PARAMETER ADJUSTMENTS
5.1 The display panel
The display panel is used for:
- Displaying the drive identification, electrical
values, operating or fault parameters
- Altering the parameter settings
Meaning of the displays:
Drive status indications:
Motor is running, blinks when ramping down.
Direction of motor rotation.
Motor is not running.
Power is on. In case of a fault, the symbol will not light up.
Drive is running outside of certain limit.
Fault is active
Control place indications:
I/O term I/O-terminals are the selected control place
Keypad Keypad is the selected control place (not used)
Bus/Comm Control through Profibus is selected (not used)
Button description
Browse the main menu and the pages of submenus
Edit values
Move in menu
Move cursor
Enter and exit edit mode
Start button
Stop button
Active faults reset / Fault history reset /Confirmation of selections