Connecting the hardware – SENA Parani-SD1100 User Manual
Page 11
11
2.2. Connecting the Hardware
This section describes how to connect the Parani-SD1100 to the serial device.
- Connect a power source to the Parani-SD1100.
- Connect the Parani-SD1100 to a serial device.
2.2.1. Connecting Power to Parani-SD1100
Parani-SD1100 can be powered from either external DC power adaptor/external power source. To
power the SD1100 from the external DC power adaptor or external power source, connect the power
jack to the power connector of the Parani-SD1100 using the DC power adapter, USB power cable or
DC power cable that is included in the package. If power is properly supplied, the [Power] lamp will
display a green color.
Figure 2-3 Connecting Power to Parani-SD1100
2.2.2. Connecting Device to Parani-SD1100
On connecting users’ serial device, users may wire it as to its interface and users may use wiring
adapter.
Figure 2-4 Connecting a Serial Device to Parani-SD1100