SENA Parani-SD1100 - Manual (Page 18)

18
Figure 3-4 Information Window
Serial port settings can be changed by <Start Configuration> and <ParaniWIN Configuration> of
ParaniWIN in the menu bar at upper left corner of the window without re-running the ParaniWIN
program.
Figure 3-5 Menu Bar at Upper Left corner of ParaniWIN
When the ParaniWin software is able to access the Parani-SD1100 properly, the icons such as Device
Setting, Connection(out), Connection(in) and Connection Wizard in the left side window will become
available for use.
In Device Setting Window, hardware reset can be executed or operation mode and RS232 can be
configured as well. Security option also can be configured in this window.