GE Industrial Solutions WattStation Pedestal EVSE Charger Operation and Maintenance - Manual (Page 11)

WattStation™ EV Charger User Manual
11 GE Energy ©2012 GE Company All Rights Reserved
Icon 7: Fault
Red when a fault has occurred. The fault icon blinks a unique
pattern that indicates the type of fault that has occurred (see Section
8.1). The fault icon will not illuminate RED if no fault has occurred or
the fault has cleared.
3.1.13 RFID swipe indicator
The RFID swipe indicator is on the top assembly that indicates
where a user should swipe their RFID card.
3.1.14 QR Code
The top assembly of the Pedestal WattStation has a ¾ ¾”” xx ¾ ¾”” Quick Response (QR) code label placed
under the top assembly cover, viewable through the top cover. Each QR code holds a unique serial
number in its image. The QR code serial number is stored in the EVSE’s SBC (Single Board Computer).
An EV driver or EVSE owner can use their iPhone and the GE WattStation application to scan the QR
code. Once the QR code is captured, the application will automatically connect to the GE WattStation
Connect and provide the driver or EVSE owner with access and information for the Pedestal
WattStation.
Figure 3.3