GE Industrial Solutions WattStation Pedestal EVSE Charger Operation and Maintenance - Manual (Page 31)

WattStation™ EV Charger User Manual
3311 GE Energy ©2012 GE Company All Rights Reserved
4.2.6 GE WattStation Connect Options
GE WattStation Connect is largely setup and ready to go at the factory. However, there are a few
configurable items to consider when setting up your WattStation.
Figure – 4.15
• Standalone Operation From WattStation Connect
This option, if checked, gives WattStation owners the ability to make their WattStation
operable even the GE WattStation Connect connection is down.
•
Station Latitude and Longitude
These settings allow GE WattStation Connect to know where your WattStation is located so it
can be properly located on the map.
• Proxy URL and Port
These settings may be required if your network administrator requires a Proxy server to be
used to gain access to the Internet.
• Timezone Offset
This setting provides the offset, in minutes, from Greenwich Mean Time (GMT) of the time zone
your WattStation is located in. Eastern Time (USA) is -300 (5 hours behind GMT).