Technical details – GE Industrial Solutions WattStation Pedestal EVSE Charger Operation and Maintenance User Manual
Page 16
WattStation™ EV Charger User Manual
16
GE Energy
©2012 GE Company All Rights Reserved
3.5
Technical Details
SAE Compliant
Level II per J1772
Vehicle Interface
SAE J1772 EV connector
Cable Length
15’ 6” cable
AC Max Charging Power Output**
7.2 kW (240VAC @ 30A)
Voltage and Rated current
208-240VAC @ 30A
AC Power Input
208-240VAC requiring only Line 1 and Line 2, or Line and Neutral,
and Earth ground
Short Circuit Rating
5kA @ 240 VAC
Recommended Service Panel
Breaker
2-pole 40A breaker on dedicated circuit
Ground Fault Protection
Internal 20mA CCID with auto-re-closure, does not require a GFCI
in service panel
Cold Load Start
Random start up between 0 and 5 minutes
Local Area Network
IEEE 802.3 (“Ethernet”) compliant: 10BASE-T, 100BASE-TX
Network Communication Protocol TCP/IP
Network Security
GE recommends that network be VPN and Firewall protected
Cellular Router (Optional)
EV-DO / HSPA
WiFi (Optional)
IEEE 802.11b/g compatible with Antenna
Metering Accuracy
< +/-2% accurate for all values (Current, Voltage, Power & Energy)
RFID Reader
HID MultiClass RP15
Display
LED Icon
Standby Power
25W typical
Outdoor Rated
Enclosure NEMA 3R
Safety Compliance
UL 2231, UL 2251, UL 2594, cUL 2231, cUL 2594, NEC 625, SAE J1772,
ETL and CETL listed
Surge Protection
6kV @ 3000A
EMI Compliance
FCC Part 15 Class A
Operating Temperature
-30°C to +50°C ambient (Operating temp. limit for cord reel is -15
Deg. C)
Operating Humidity
Up to 95% non-condensing
Approximate Shipping Weights
120 lb
Dimensions
51”H x 15”Dia
Table – 3.2
**The maximum power consumption is determined by EVSE. The actual power consumption
is determined by EV.