GE Industrial Solutions WattStation Pedestal EVSE Charger Operation and Maintenance - Manual (Page 19)

WattStation™ EV Charger User Manual
1199 GE Energy ©2012 GE Company All Rights Reserved
The next step is to select IPv4 and click properties (on some older operating systems that don’t
support IPv6 this might just be TCP/IP settings or something similar). Uncheck “Obtain an IP address
automatically” and instead assign a static IP address on the same subnet as the WattStation and
subnet mask as shown below.
Figure – 4.2
After saving settings reboot the computer or otherwise verify that its IP settings have changed.
Connect the computer’s Ethernet port to the WattStation’s Ethernet switch with a Cat5 cable.
Connection to the configuration tool can now be made by typing the following into the browser’s URL
window.
Type into URL window: https://192.168.13.1
The web browser will likely respond with a screen questioning the security of the WattStation’s
https server. This is fine and to be expected (see Section 4.2.1 – Accepting Connection to the
Configuration Tool).