GE Industrial Solutions EntelliGuard R AKD-5 - Manual (Page 21)

20 EntelliGuard R Circuit Breaker Retrofill AKD-5 Installation Manual DEH-41547 02/12
Figure 13. Legacy Indicator Assembly Figure 14. Bracket Template for
Drilling Holes
5. Slide the bracket ( Figure 14 ) up to its fixing location as shown in the illustration ( Figure 15 ).
6. Line up the guiding holes ( Figure 16 ).
Figure 15. Slide Bracket Up Figure 16. Line Up Holes
7. Mark the bottom two holes using the bracket as a template.
8. Take the bracket out and drill 0.18-in diameter pilot holes in the frame.