Controller defaults – GE Industrial Solutions GPS4827 User Manual
Page 56
Galaxy Power System GPS4827
54
Controller Defaults
Dip Switch Settings
The Millennium has 8 dip switch positions (SW202) that may be changed. SW202 is
located on the MCR1 board, above the MCR2 board. (See figure 4-7)
Figure 9-7:
Millennium II Controller Dip Switches
Table 9-G: Millennium II Controller Dip Switch Settings
Switch
Position
Default
Description
Closed
(1)
Open
(0)
SW202-8
1
Front Panel Configuration
ENABLED
DISABLED
SW202-7
0
Modem/Aux/Local/Gateway/USB/
IRDA Port Setting Configuration
(Remote Access)
ENABLED
DISABLED
SW202-6
0
Enhanced Security Mode (See
table 4-H, for features affected
ENABLED
DISABLED
SW202-5
1
Auxiliary Port Configuration
RS-232
RS-485
SW202-4
1
Remote Rectifier in Standby
ENABLED
DISABLED
SW202-3
0
Boost Mode
ENABLED
DISABLED
SW202-2
1
Reserved for Future Use
ENABLED
DISABLED
SW202-1
1
Reserved for Future Use
ENABLED
DISABLED