GE Industrial Solutions EPM1500 Single Point Submetering System - Manual (Page 31)

CHAPTER 3: USING THE METER
EPM 1500 SUB-METER – INSTRUCTION MANUAL 3–7
3.4 Resetting the Demand Values
3.4.1 Procedure
Use the following procedure to reset the Demand registers to zero:
Z Press and hold the Demand Reset button.
• The LCD will initially display a
copyright message.
• The LCD will then display the Dmdreset event screen:
Z Keep the Demand Reset button depressed until the screen updates
and displays the current date and time. This signifies that the
demand has been reset.
Dmdreset 1
20:00 06/14/2003